five axis Automatic spray painting machine
Control system | - Japanese OMRON PLC
- Taiwan WEINTEK Color industrial touch screen
- Schneider Electric switch and Power Supply
4. Japanese OMRON relay |
Drive system | Japanese Panasonic servo drive system |
Transmission system | - 1. Aluminium profile module
- 2. Taiwan HIWIN Linear guide rail
- 3. Taiwan HIWIN Silent slide
- 4. Precision synchronous wheel
- 5. Italy Megadyne Synchronous belt with steel wire
- 6. positioning accuracy difference ±1mm
|
Product exchang platform | - Precision divider
- Taiwan CPG Gear motor
3. Japanese Mitsubishi frequency converter |
Product rotation platform | - Precision divider
2.Can be 90 degrees, 180 degrees rotation, continuous rotation |
Spray gun | Japanese ANEST IWATA |
Paint supply system | - Amercian GRACO 308 diaphragm pump
- Pneumatic agitator produce from Taiwan,China
- Taiwan AIRTAC Solenoid valve, Pressure regulating valve, Pressure
gauge
|
Power supply | AC220V50HZ, Single phase three wire |
The detailed configuration of the robot has written in the form,
you can see our automatic spraying painting machine's configuration
is high ,so the failure rate of machine is very low. If i were you
,i would buy a high quality machine if i want to buy a machine from
abroad. Then, why don't you choose us?
Why use Spray Painting Machine?
1. Increase production efficiency
2. Cut down the operating cost
3. Improve product quality and consistency
4. Reduce material waste and boast productivity
5. Cut the standard cost-optimize the storage and complicated process
6. Shortens the product upgrading cycle and the equipment investment
7. Improve the working condition of workers
8. Low down the technical requirements for workers
Product details
Certificate
Exhibition
Our customers' factory
Our customer
Hot sell
Packaging & Shipping
FAQ:
Question 1: I don't know anything about the machine. Will you
provide the technical support?
Answer: Sure. Every machine will be test before delivery. We will make
sure there is no problem for the machine.
You may send 2-3 smart workers to come to our factory to learn how
to operate the machine.
When the machine arrives your factory, we will send the experts to
your factory to help for installation. Operation training will be
provide. It may take about 20-30 days. Maintenance tips will be
given.
Also, we provide consulting service for creating the proper
facilities for running the machine.
Question 2: What is price of the machine?
Answer: The machine is custom made. If you have any drawing or any
information on specification of the machine, please send to us for
quote.
If you are totally new in this area, please tell us the max.
dimension of your products, its application, and your desired daily
capacity.
We will provide our professional suggestions and work out an
appropriate design for your project.
Question 3: What kind of pre-treatment I need to do before loading
to reciprocator?
Answer: the products have to be CLEAN AND DRY.
Question 4: Is it safe to operate the machine?
Answer: The machine provides security setup and all mechanical units can
be controlled from touch screen. So the machine itself is very safe
to use.
Before sales:
1. Our experts are ready to provide custom design and suggestion for
each case.
2. We provide professional consulting service for painting machine and
lines.
After-sales:
1. We will send the engineers for onsite installation, fine tune and
operation training.
2. We will provide troubleshooting service all lifetime.
3. We provide 1 year warranty for each machine.
4. We will contact you back periodically to learn machine conditions.
5. We also provide the service for further extension on your existing
machine.
Contact method
Skype: sqrobot QQ:598692151
Tel /wechat / whatsapp: +86 13168032718
